The Diamond Glass Densifier is an eco-friendly, impregnating lithium silicate densifier specifically designed to be used in the polishing of natural and cementitious surfaces. It is a concentrated formula and dilutes with water. It can be used in both interior and exterior applications. The Diamond Glass Densifier penetrates and protects the surface without affecting its natural appearance. The polishing application increases the abrasion resistance while increasing the resistance to freeze/thaw scaling, efflorescence, spalling, staining, mildew and fungi, and water intrusion. The enhanced penetration capability with the NANO glass beads provide extended life, higher abrasion resistance with lower maintenance requirements, reduced cleaning costs and repairs while achieving an extremely high degree of reflection. It forms a dense, breathable, surface that will not flake or peel. The natural reaction of the lithium silicate with the lime / calcium hydroxide of the cement close off most of the fine capillaries in the concrete creating a highly dense, hard surface and greater light reflection.
The 35 Series Diamond Glass Densifier can be use over stucco, granite, natural stone, limestone, terrazzo, decorated concrete and any material made with Portland Cement as a binder. Typical applications include concrete, polished concrete or stone flooring, countertops or any porous surface, natural stone or cementitious product, requiring added protection or reflectivity.
Ensure the substrate is dry and free of all foreign materials such as curing agents, laitance, glaze, efflorescence, dust, dirt, oil, grease, curing compounds, etc. that may impair or prevent penetration or bonding.
The Diamond Glass Densifier may be applied by spray, roller or brush. NOTE: Be sure to stir or shake thoroughly before applying. As a densifier for polished concrete it is best applied with a pump type sprayer and applied with a microfiber floor applicator. Mix the product with 4 parts water to 1 part Diamond Glass Densifier (one gallon container makes 5 gallons of ready to use densifier). Surface should be evenly saturated. Do not allow liquid to puddle. Depending on surface porosity, climate and temperature, dry time can be as much as 2 hours. Once treated, the surface can take foot traffic after 2 hours. The surface will continue to harden over time, reaching its maximum durability and resistance over approximately 7 days. Use water to clean tools or equipment, no special or hazardous disposal methods are necessary.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.