14"x28" VESPA Pad - 800 Grit (pkg of 5) - 255-5012

The 43.1 Series of V.E.S.P.A. Polishing Pads have been designed for demand to use on rectangular orbital motion flooring equipment. A Value Engineered Simplified Polishing Apparatus is an economical alternative to traditional polished concrete and terrazzo when smaller budgets need to be met but a densified/hardened/refined surface is needed for the end result. Universal Polishing Systems has infused our proprietary HYBRID metal bond matrix into our diamond encrusted Hurricane pad. The VESPA is designed to use on orbital type floor machines and automatic scrubbers Faster cut, faster hone and faster polish is the result. The VESPA is ideal on new, flat concrete. It is designed to open, hone and polish/refine; it is in no way intended to flatten a concrete surface. For older, uneven surfaces, the concrete should be grinded with traditional grinding equipment and tooling in preparation for the VESPA pad to complete the polishing process.

Uses
The V.E.S.P.A. pads may be used wet or dry and are available in 14” x 20” and 14” x 28” sizes with 30, 50, 100, 200, 400, 800 and 1500 grit available. The V.E.S.P.A. polishing system will open the surface of flat concrete and hone the surface to properly accept a densifier/hardener and continue to hone and polish to 1500 grit ready for guard/sealer. The larger grits (30, 50, 100) are ideal for quick mechanical preparation for coatings and overlays and ideal for removal of heavily waxed or finished surfaces. Quickly refurbish/re-polish existing, well-worn, improperly maintained densified/hardened concrete or terrazzo.

Application
The V.E.S.P.A. pads have many uses and applications. The entire pad is coated with a diamond powder of the same grit as the infused HYBRID metal bond. The pad can be flipped over and used to as a cleaning or burnishing pad.

Coverage
Coverage can vary from surface to surface depending on roughness, porosity and density of the medium being applied. Application technique can also vary the coverage. On flat, dense surfaces, the coverage should generally range from 5000 to 10,000 square feet per pad.

Sizes:

14” x 20”
14” x 28”
Thickness: 3/8” inch

Cautions
The Value Engineered Semi-Polished Application, VESPA Pad is designed to run at low to high speed, 200 to 1500 rpm. Caution should be taken on any surface with control joints, expansion joints, cracks, gouges, holes or deep scratches in the surface. Any height differential from one area of the slab to another can cause damage to the VESPA. Be certain to walk the entire area and address any differences in height with a hand grinder or floor grinder to level out any differences in slab heights. Deep gouges or scratches should be filled and leveled to the slab as well or damage can be incurred to the VESPA Pad.
Any nails, screws, anchors, anchoring devices, etc., must be removed or ground to the surface of the slab prior to running the VESA Pad over the surface.
The VESPA Pad is designed to be used wet or dry. When running the VESPA Pad wet, the surface should be saturated and continually kept saturated. The wetter, the better! The heat created with the VESPA Pad on dampened or misted surfaces will quickly turn the slurry into a thickened paste and the paste will gather on the VESPA Pad and can dramatically reduce the VESPA Pads effectiveness. It is recommended to thoroughly clean the pads after each use with water to keep the pad clear of buildup of slurry or dust.